How To Install J200GUDXU1AOI4 Android 5.1.1 Lollipop on Galaxy J2 SM-J200GU [Complete Tutorial]


Simple steps to install Update Official Firmware J200GUDXU1AOI4 for Galaxy J2 SM-J200GU  – J200GUDXU1AOI4 Android 5.1.1 Lollipop for Samsung Galaxy now you can get the new update of ROM Official Firmware 5.1.1 Lollipop through the download Zip file contains rom
Official update for Galaxy J2 SM-J200GU you can get its on your computer by following the detailed explanation of how to install Rom.

We
recommend that you always update your operating the system Android And
follow-up the latest updates available for your system, since it
improves the performance of the Phone.
In the beginning should Updated dear follow Rom installation steps carefully until the bug does not occur God forbid.
Before installing the Rom Official Firmware Lollipop 5.1.1 Phone Galaxy J2 SM-J200GU
    How To Update J200GUDXU1AOI4 Android 5.1.1 Lollipop on Galaxy J2 SM-J200GU [Complete Tutorial]

  1. Installation of rom at your own risk and accepts Install Android Firmware
    any damage to your Phone as a result of erroneous application.

    The Rom custom to your Galaxy J2 SM-J200GU  only and does not fit mounted on any other device.
    “model number from Settings-About Phone”

  2.  You get a backup copy of all your personal information stored on your computer to avoid loss in case of any mistake.
  3.  Must be your battery over 50% at least before proceeding with the application process.
  4.  Do not remove the cable from the Phone after you start the process of installing the ROM for any reason whatsoever.
  5.  Attached images with commentary are illustrations and may differ slightly.
  6.  You must do Activation Debugging mode USB property from the settings menu on your Phone.
Update Galaxy J2 SM-J200GU   Firmware J200GUDXU1AOI4 Android 5.1.1  Lollipop- Full InstallationAll
the above pre-requisites are very important and must follow before
proceed to installation guide. Hope you get all the above points. Now,
go through the below tutorial to install Android 5.1.1 Lollipop J200GUDXU1AOI4 official firmware on Galaxy J2 SM-J200GU

Turn
on USB Debugging mode, go to Settings-General-Developer Options (As the
Developer options are hidden by default on all Android device running
on Android 4.2 or up, So go to Settings-General-About on your Galaxy J5
and tap Build Number for 7 times to visible the Developer options.) See
the image below.

Make
sure that the ROM is compatible with your Phone, you may not use from
Phone to another Phone, even if the difference in number or one
character of this Rom custom of Galaxy J2 SM-J200GU – J200GUDXU1AOI4 Android 5.1.1 Lollipop

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

Rom Official Firmware Details for Lollipop 5.1.1  Galaxy J2 SM-J200GU

Model: SM-J200GU
Model Name: Samsung Galaxy J2 SM-J200GU
Version: Android 5.1.1 Lollipop
PDA: J200GUDXU1AOI4

Files required for installing the Rom Official Firmware 5.1.1 Lollipop Phone Galaxy J2 SM-J200GU

Device definitions to your computer recognizes | here | Samsung software installation or 
kies | here |
Unzip the program ROM | here |.
Program Odein Odin 3.07 | of here |
Remember:
that in the absence of Rom’s country you can download from another and
installed on your Phone as long as the version is compatible.
Samsung
rolled out the firmware for the following countries. The firmware which
are unbranded or not locked to any carrier, no matter of which country
or region, can be flashed on any Galaxy J2 SM-J200GU

Rom all Official Firmware file States that with the update:

(Firmware for rest of the countries and carrier will be added here when available)

Ways to install the Official Firmware update J200GUDXU1AOI4 Android Android Phone 5.1.1 Lollipop Galaxy J2 SM-J200GU

You can silently install Rom Official Firmware Android Phone in many ways, they are as follows:

How Install Rom Official Firmware Galaxy J2 SM-J200GU  through PC via Samsung program kies.

Search for a Wi-Fi network or stable connection to the Internet.
You must install the Samsung application  Kies (Samsung Kies Utility) on your computer.
Connect your Phone to your computer.
Run a program (Samsung Kies) program will recognize your Phone immediately.
On
the home screen for Samsung Kies, you’ll see “New Firmware Upgrade is
available” notification (if notification-“This is the last firmware”,
this means that users of the machine did not have the latest Firmware on
Kies, you can check back later, or try flashing manually by (Odin)
Click the “Firmware Upgrade” to start the update process.
Follow the instructions that appear on the screen.
Once done your Phone will restart itself automatically.
After the reboot you can disconnect your Phone to your computer.

How do you update a Rom Official Firmware J200GUDXU1AOI4 Android 5.1.1 Lollipop Galaxy J2 SM-J200GU  through pneumatic direct updates.

We open the WiFi on Android Phone or through mobile data (Internet) be sure to have a stable Internet connection.
Go
to Settings-About then click on Update or update option (if you receive
content “The latest update have already been installed,” and you do not
receive any updates yet, try through Samsung application kies).
Click OK to start the download and installation process.
Once you do this the device will restart itself automatically become installation.

How to update to Official Firmware Rom J200GUDXU1AOI4 Android 5.1.1 Lollipop Phone Galaxy J2 SM-J200GU through Odein.

The
formal methods for receiving and updating the Official Firmware Rom
J200GUDXU1AOI4 Android 5.1.1 Lollipop your Galaxy J2 SM-J200GU are through
previous methods way Samsung software kies or by receiving updates air
but most of us prefer the manual method through the odin , and in the
following Steps you will find a detailed explanation of how to install
the ROM through your Odein program .
1.Install the device definitions first files you downloaded on your computer.
2.Then
unzip the ROM by holding the right button on the file and select
Extract Here Rom will have a file with the extension tar.md5 and ROM
for your Phone you will find a file named J200GUXXDLJ5_J200GUODDDLI7_INU.tar.md5
Rom Official Firmware Samsung Galaxy J2 SM-J200GU update J200GUDXU1AOI4

Rom Official Firmware Samsung Phone Galaxy J2 SM-J200GU    J200GUDXU1AOI4 update for 5.1.1  Lollipop
3. now press the AP option and chose file rom after unzip and holds a formula Tar.MD5 appears after choosing the file as the following picture:

Rom Official Firmware Samsung Phone Galaxy J2 SM-J200GU    J200GUDXU1AOI4 update for 5.1.1  Lollipop
4. now we will insert the Phone in download mode and the Phone input method easy to follow next
Login to download mode turns off the device and then pressing the three buttons (volume down button + button + power button )

Update Galaxy J2 SM-J200GU    to Firmware J200GUDXU1AOI4 Android 5.1.1  Lollipop

5. You have
shown the following alert override Warning by pressing the button to
raise the volume up and you will see the following image on your phone as the following picture:
Update Galaxy J2 SM-J200GU    to Firmware J200GUDXU1AOI4 Android 5.1.1  Lollipop
After pressing the button to volume up you will find your scroll automatically as following picture :

Update Galaxy J2 SM-J200GU    to Firmware J200GUDXU1AOI4 Android 5.1.1  Lollipop

6.
After you’ve proven definitions for your Phone and the Phone into the
Don to as the previous image now connect your Phone to your
computer via a USB link, preferably those original link you find the
computer in the check your Phone to know it as the following picture:
Update Galaxy J2 SM-J200GU    to Firmware J200GUDXU1AOI4 Android 5.1.1  Lollipop

Now connect your Galaxy J2 SM-J200GU  to your computer via USB cable

6. Now Go back to Odin to see that box ID:COM turned to blue, this indicates that your Galaxy J2 SM-J200GU connected successfully and the following picture:
ID: COM box turned to blue

Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.

7.
Click here to Start running and will show you the installation blue
screen and then a black screen with white square let him and don’t touch
anything Even computer until the
pass from and show you the PASS Word to the color green in Odin program as the following picture:

Rom Official Firmware Samsung Phone Galaxy J2 SM-J200GU    J200GUDXU1AOI4 update for 5.1.1  Lollipop
Odin after installing ROM
Prepare your Phone restarts itself automatically now and enter to the main screen and installed Rom Official Firmware J200GUDXU1AOI4 Android 5.1.1 Lollipop Phone Galaxy J2 SM-J200GU successfully J200GUDXU1AOI4 Congrats you update.

 More easily

  1. Download Android 5.1.1 J200GUDXU1AOI4 Firmware for Galaxy J2 SM-J200GU  from the above list
  2. Download Odin 3.07
  3. Switch off your Phone and boot Galaxy J2 SM-J200GU into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy J2 SM-J200GU  to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: 
    2.Then
    unzip the ROM by holding the right button on the file and select
    Extract Here Rom will have a file with the extension tar.md5 and ROM
    for your Phone you will find a file named J200GUXXDLJ5_J200GUODDDLI7_INU.tar.md5

    )

  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your Phone should automatically reboot after completion
  13. You can now disconnect your Phone from computer
  14. Finish

Solve problems you may encounter while installing some roJ200GUDXU1AOI4 Official Firmware Android 5.1.1 Lollipop Phone Galaxy J2 SM-J200GU

If the Phone has stopped more than 15 minutes on the main boot screen or you see a screen of death as some call it
Follow the following:
Remove the battery from the Phone.
Enter Stock Recovery mode by pressing the three buttons ( volume down button + button + power button )
Now select Wipe Data/Factory Reset and Wipe Cache Partition, respectively, and you can navigate inside Recovery mode through the sound buttons after you complete the process click on reboot
The problem was solved.

Explain the installation root for Galaxy J2 SM-J200GU  J200GUDXU1AOI4 Android 5.1.1 Lollipop.

We
also we work provides a detailed explanation of how the Rom
J200GUDXU1AOI4 Android truites 5.1.1 Lollipop Phone Samsung Galaxy J2 SM-J200GU  detailed explanation you the documentation  from the following
link:
Explain the installation Root Phone Galaxy J2 SM-J200GU 5.1.1 Lollipop
In the absence of a special link to download root above this means that we will put in the nearest time

Here is the topic has ended and has got the Official Firmware update for your device and also to root availability.






More About Model OR


Leave a Reply

Be the First to Comment!

avatar
  Subscribe  
Notify of