How to Update N920VVRU2AOJ2 ON Galaxy Note5 SM-N920V to Android 5.1.1 Lollipop


Hello everyone today been released the official Firmware update VRU2AOJ2 to phone Galaxy Note5 SM-N920V The large group
of users converge on their official update to Android 5.1.1 Those who
did not receive the update you can now get it from Galaxy Rom we will explain the steps of installation step by step

N920VVRU2AOJ2
Android 5.1.1 is the new official firmware update for the Galaxy Note5 SM-N920V and now it is available and you can download it from Install
Android Firmware Website and get help to updating and installing it with
our Complete Tutorial. 

There
are several ways to install VRU2AOJ2 Android 5.1.1 Lollipop on your
Galaxy Note5 SM-N920V so, read this tutorial and you will be able to
get the new update easily.

We recommended that you
always update your Android OS on your Android Device because it will
improve the performance of your Phone.

Note: Read this
tutorial carefully and do it on you own risk. Galaxy Rom
Website Team are not responsible for any damage caused on your phone ,
so be careful when you do anything and make sure that you are doing it
with the right way.

Please read the notes before installing the Official ROM/Firmware Lollipop 5.1.1 Phone Galaxy Note5 SM-N920V

    N920VVRU2AOJ2 Update Android 5.1.1 Lollipop on Galaxy Note5 SM-N920V

  1. Installation of this
    ROM/Firmware on your own risk and as we said Galaxy Rom
    Website Team are not responsible for any damage caused on your phone .
  2. This ROM/Firmware for Galaxy Note5 SM-N920V  only ,So don’t install it on any other
    Samsung device .Check your device model and be sure that is matched the
    same Model here in this tutorial . Go to Settings > About Phone >
    Model Number .
  3.  Make a backup for
    your personal data to avoid data losing.
  4.  Make sure that your
    battery is 50% at least before starting the update process.
  5.  Don’t move or remove the USB
    cable during the Firmware installation Process .
  6.  Attached images are
    examples only, so you may find some difference, but all steps are same at
    all.
  7.  Enable USB Debugging Mode
    on your Samsung device by going to developer options ( If you can’t find
    Developer Options you must show it by going to Settings > About phone
    then tab 7 times on Build Number and you will get message tell you that
    the developer options are enabled , See the image below).

    Enable USB Debugging Mode on your Samsung device by going to developer options ( If you can’t find Developer Options you must show it by going to Settings > About phone then tab 7 times on Build Number and you will get message tell you that the developer options are enabled , See the image below).
  8. All the above notes are very important and you must follow
    them before proceeding the installation process.

Rom Official Firmware Details for Lollipop 5.1.1 Galaxy Note5 SM-N920V

Model: SM-N920V
Model Name: Samsung Galaxy Note5 SM-N920V
Version: Android 5.1.1 Lollipop
PDA: N920VVRU2AOJ2

Download Official Firmware Galaxy Note5 SM-N920V

After
the download you can Now, follow our tutorial to learn how to install
Android 5.1.1 Lollipop N920VVRU2AOJ2 official firmware on Galaxy Note5 SM-N920V follow this explanation to figure out how to install Samsung
official Firmware ROMs
 |How to update and install the firmware for Samsung phones by Odin /kiss/ota|or
follow our tutorial in that page

Installing Official ROM/Firmware N920VVRU2AOJ2 Android 5.1.1 Lollipop on Galaxy Note5 SM-N920V through Odin?

The previous methods for receiving Official ROM/Firmware
update N920VVRU2AOJ2 Android 5.1.1 Lollipop on your Galaxy Note5 are the official methods, but most of us doing it with the manual
method through the Odin , So the following steps will show you how to do it
with Odin program .
  1. Install the Samsung USB driver .
  2.  Unzip the ROM file and
    you will have this file with this name N920VXXDLJ5_N920VODDDLI7_INU.tar.md5
    .
    It is the N920VVRU2AOJ2 Android 5.1.1 Lollipop Official
    ROM/Firmware update for Samsung Galaxy Note5 SM-N920V

    How to Install Galaxy Note5 SM-N920V to N920VVRU2AOJ2 Android 5.1.1 Lollipop
  3. Now press the AP button
    and choose the ROM file with .tar.md5 that you just extracted it . See the
    following picture:

    How to Install Galaxy Note5 SM-N920V to N920VVRU2AOJ2 Android 5.1.1 Lollipop
  4. Now we will get into the
    download mode  in your Samsung
    device . To enter the download mode do the following , Turn off the device
    and then press and hold this three buttons (volume down button + Home
    button + power button )
    .

    How to Install Galaxy Note5 SM-N920V to N920VVRU2AOJ2 Android 5.1.1 Lollipop

  5. You will have this alert as
    shown in the following picture, so press Volume Up button to continue .

    How to Install Galaxy Note5 SM-N920V to N920VVRU2AOJ2 Android 5.1.1 Lollipop
  6. After
    pressing the Volume Up button you are now on the download mode and ready for
    flashing. You will find a screen like the screen in the following picture .

    After pressing the Volume Up button you are now on the download mode
  7. Now
    you are already have the Samsung USB Driver and when you entered the Download
    Mode as shown in the previous picture, you can now connecting your Samsung
    Galaxy Note5 SM-N920V
    via USB Cable then you will find that your PC
    now is installing the device driver and recognizing it as shown in the
    following picture .

    installing the device driver and recognizing
  8. Now Go back to Odin to see if
    the ID:COM box’s color
    turned into blue color or not, this blue color means that your Samsung
    Galaxy Note5 SM-N920V
    connected successfully and the Odin
    recognized it as shown in the following picture:

     Go back to Odin to see if the ID:COM box’s color turned
  9. Make
    sure that the “Auto Reboot” and “F. Reset Time” options only are checked.

  10. Click
    on the Start button in Odin to start the
    flashing process. You will find the blue color progress bar then will turn into
    black with white square ( Don’t touch anything in the Odin program or in your
    phone and also don’t move your phone or the USB cable to avoid errors ). If the
    flashing process completed successfully you will find the PASS! Message with green
    background as shown in the following picture. It means that the operation
    completed successfully and now you can disconnecting your phone safely.

     Go back to Odin to see if the ID:COM box’s color turned
  11. After
    installing that firmware your phone will reboot automatically and we can say to
    you now congratulations you have now the Official Firmware
    N920VVRU2AOJ2 Android 5.1.1 Lollipop on your Phone Samsung Galaxy Note5 SM-N920V.

Conclusion :

  1. Download Android 5.1.1 N920VVRU2AOJ2 Firmware for Galaxy Note5 SM-N920V from the previous download links.
  2. Download Odin V 3.07
  3. Switch off your Phone and enter
    the Galaxy Note5 SM-N920V into Download Mode by
    pressing and holding the Volume Down + Home + Power buttons
    (long press until the boot screen appear), now press Volume Up key
    to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip
    file and run the Odin3 v3.07.exe file as
    administrator
     (Right click on the .exe file and click on Run as
    administrator).
  5. Now connect your Galaxy Note5 to your computer via USB cable.
  6. In Odin screen, you
    should see a COM Port number like “0:[COM7]” at ID:COM
    section and you will find a text appearing in the message box, it
    means that your device has been detected by Odin.
  7. Make sure that the “Auto
    Reboot”
     and “F. Reset Time” options only are
    checked.
  8. Now, extract the downloaded
    firmware zip file, you’ll find a firmware file with that extension .tar.md5
    .
  9. In Odin screen, click on PDA button
    and select the firmware file with the .tar.md5 extension (You
    will find the firmware file name looks like something like that : N920VXXDLJ5_N920VODDDLI7_INU.tar.md5.
  10. Now, click on the Start button
    to begin the installation process, wait for a few moments until the
    installation process completed.
  11. When the installation process
    is completed,  you will see the PASS! message with
    a green background appears in the ID:COM port.
  12. Your Phone will automatically
    reboots after installation process finishing.
  13. You can now disconnect your
    Phone from your PC safely .
  14. It’s done !!

If your device stuck in
boot loop after installing the firmware update like N920VVRU2AOJ2 Official
Firmware Android 5.1.1 Lollipop on Galaxy Note5 SM-N920V, then you can do
the following method:

If the Phone has stopped more than 15 minutes on the main
boot screen or you see a screen of death as it known follow the following:
1-     
Remove
the battery from your phone.
2-     
Power
on your phone in the Recovery mode by pressing the next three
buttons ( volume down button + home button + power
button )
.
3-     
Now
select Wipe Data/Factory Reset and Wipe Cache Partition. You can navigate
inside Recovery mode by using the sound buttons. After finishing you should
now click on reboot
4-     
Now
the problem should fixed.

Guide to help you in installing
Root on Galaxy Note5 SM-N920V – N920VVRU2AOJ2 Android
5.1.1 Lollipop.

We
also work at provides a detailed explanation of how the root N920VVRU2AOJ2 Android 5.1.1 Lollipop on Phone Samsung Galaxy Note5 SM-N920V detailed explanation you the from the following link:
Explain How to Get Root on Phone Galaxy Note5 SM-N920V 5.1.1 Lollipop
In the absence of a special link to download root above this means that we will put in the nearest time

Here is the topic has ended and has got the Official Firmware update for your device and also to root if availability.






More About Model OR


Leave a Reply

Be the First to Comment!

avatar
  Subscribe  
Notify of