How to Install E500MUBU1AOI1 ON Galaxy E5 SM-E500M to Android 4.4.4 KitKat


Hello everyone today been released the official Firmware update UBU1AOI1 to phone Galaxy E5 SM-E500M The large group
of users converge on their official update to Android 4.4.4 Those who
did not receive the update you can now get it from Galaxy Rom we will explain the steps of installation step by step

E500MUBU1AOI1
Android 4.4.4 is the new official firmware update for the Galaxy E5 SM-E500M and now it is available and you can download it from Install
Android Firmware Website and get help to updating and installing it with
our Complete Tutorial. 

There
are several ways to install UBU1AOI1 Android 4.4.4 KitKat on your
Galaxy E5 SM-E500M so, read this tutorial and you will be able to
get the new update easily.

We recommended that you
always update your Android OS on your Android Device because it will
improve the performance of your Phone.

Note: Read this
tutorial carefully and do it on you own risk. Galaxy Rom
Website Team are not responsible for any damage caused on your phone ,
so be careful when you do anything and make sure that you are doing it
with the right way.

Please read the notes before installing the Official ROM/Firmware KitKat 4.4.4 Phone Galaxy E5 SM-E500M

    E500MUBU1AOI1 Update Android 4.4.4 KitKat on Galaxy E5 SM-E500M

  1. Installation of this
    ROM/Firmware on your own risk and as we said Galaxy Rom
    Website Team are not responsible for any damage caused on your phone .
  2. This ROM/Firmware for Galaxy E5 SM-E500M  only ,So don’t install it on any other
    Samsung device .Check your device model and be sure that is matched the
    same Model here in this tutorial . Go to Settings > About Phone >
    Model Number .
  3.  Make a backup for
    your personal data to avoid data losing.
  4.  Make sure that your
    battery is 50% at least before starting the update process.
  5.  Don’t move or remove the USB
    cable during the Firmware installation Process .
  6.  Attached images are
    examples only, so you may find some difference, but all steps are same at
    all.
  7.  Enable USB Debugging Mode
    on your Samsung device by going to developer options ( If you can’t find
    Developer Options you must show it by going to Settings > About phone
    then tab 7 times on Build Number and you will get message tell you that
    the developer options are enabled , See the image below).

    Enable USB Debugging Mode on your Samsung device by going to developer options ( If you can’t find Developer Options you must show it by going to Settings > About phone then tab 7 times on Build Number and you will get message tell you that the developer options are enabled , See the image below).
  8. All the above notes are very important and you must follow
    them before proceeding the installation process.

Rom Official Firmware Details for KitKat 4.4.4 Galaxy E5 SM-E500M

Model: SM-E500M
Model Name: Samsung Galaxy E5 SM-E500M
Version: Android 4.4.4 KitKat
PDA: E500MUBU1AOI1

Download Official Firmware Galaxy E5 SM-E500M

After
the download you can Now, follow our tutorial to learn how to install
Android 4.4.4 KitKat E500MUBU1AOI1 official firmware on Galaxy E5 SM-E500M follow this explanation to figure out how to install Samsung
official Firmware ROMs
 |How to update and install the firmware for Samsung phones by Odin /kiss/ota|or
follow our tutorial in that page

Installing Official ROM/Firmware E500MUBU1AOI1 Android 4.4.4 KitKat on Galaxy E5 SM-E500M through Odin?

The previous methods for receiving Official ROM/Firmware
update E500MUBU1AOI1 Android 4.4.4 KitKat on your Galaxy E5 are the official methods, but most of us doing it with the manual
method through the Odin , So the following steps will show you how to do it
with Odin program .
  1. Install the Samsung USB driver .
  2.  Unzip the ROM file and
    you will have this file with this name E500MXXDLJ5_E500MODDDLI7_INU.tar.md5
    .
    It is the E500MUBU1AOI1 Android 4.4.4 KitKat Official
    ROM/Firmware update for Samsung Galaxy E5 SM-E500M

    How to Install Galaxy E5 SM-E500M to E500MUBU1AOI1 Android 4.4.4 KitKat
  3. Now press the AP button
    and choose the ROM file with .tar.md5 that you just extracted it . See the
    following picture:

    How to Install Galaxy E5 SM-E500M to E500MUBU1AOI1 Android 4.4.4 KitKat
  4. Now we will get into the
    download mode  in your Samsung
    device . To enter the download mode do the following , Turn off the device
    and then press and hold this three buttons (volume down button + Home
    button + power button )
    .

    How to Install Galaxy E5 SM-E500M to E500MUBU1AOI1 Android 4.4.4 KitKat

  5. You will have this alert as
    shown in the following picture, so press Volume Up button to continue .

    How to Install Galaxy E5 SM-E500M to E500MUBU1AOI1 Android 4.4.4 KitKat
  6. After
    pressing the Volume Up button you are now on the download mode and ready for
    flashing. You will find a screen like the screen in the following picture .

    After pressing the Volume Up button you are now on the download mode
  7. Now
    you are already have the Samsung USB Driver and when you entered the Download
    Mode as shown in the previous picture, you can now connecting your Samsung
    Galaxy E5 SM-E500M
    via USB Cable then you will find that your PC
    now is installing the device driver and recognizing it as shown in the
    following picture .

    installing the device driver and recognizing
  8. Now Go back to Odin to see if
    the ID:COM box’s color
    turned into blue color or not, this blue color means that your Samsung
    Galaxy E5 SM-E500M
    connected successfully and the Odin
    recognized it as shown in the following picture:

     Go back to Odin to see if the ID:COM box’s color turned
  9. Make
    sure that the “Auto Reboot” and “F. Reset Time” options only are checked.

  10. Click
    on the Start button in Odin to start the
    flashing process. You will find the blue color progress bar then will turn into
    black with white square ( Don’t touch anything in the Odin program or in your
    phone and also don’t move your phone or the USB cable to avoid errors ). If the
    flashing process completed successfully you will find the PASS! Message with green
    background as shown in the following picture. It means that the operation
    completed successfully and now you can disconnecting your phone safely.

     Go back to Odin to see if the ID:COM box’s color turned
  11. After
    installing that firmware your phone will reboot automatically and we can say to
    you now congratulations you have now the Official Firmware
    E500MUBU1AOI1 Android 4.4.4 KitKat on your Phone Samsung Galaxy E5 SM-E500M.

Conclusion :

  1. Download Android 4.4.4 E500MUBU1AOI1 Firmware for Galaxy E5 SM-E500M from the previous download links.
  2. Download Odin V 3.07
  3. Switch off your Phone and enter
    the Galaxy E5 SM-E500M into Download Mode by
    pressing and holding the Volume Down + Home + Power buttons
    (long press until the boot screen appear), now press Volume Up key
    to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip
    file and run the Odin3 v3.07.exe file as
    administrator
     (Right click on the .exe file and click on Run as
    administrator).
  5. Now connect your Galaxy E5 to your computer via USB cable.
  6. In Odin screen, you
    should see a COM Port number like “0:[COM7]” at ID:COM
    section and you will find a text appearing in the message box, it
    means that your device has been detected by Odin.
  7. Make sure that the “Auto
    Reboot”
     and “F. Reset Time” options only are
    checked.
  8. Now, extract the downloaded
    firmware zip file, you’ll find a firmware file with that extension .tar.md5
    .
  9. In Odin screen, click on PDA button
    and select the firmware file with the .tar.md5 extension (You
    will find the firmware file name looks like something like that : E500MXXDLJ5_E500MODDDLI7_INU.tar.md5.
  10. Now, click on the Start button
    to begin the installation process, wait for a few moments until the
    installation process completed.
  11. When the installation process
    is completed,  you will see the PASS! message with
    a green background appears in the ID:COM port.
  12. Your Phone will automatically
    reboots after installation process finishing.
  13. You can now disconnect your
    Phone from your PC safely .
  14. It’s done !!

If your device stuck in
boot loop after installing the firmware update like E500MUBU1AOI1 Official
Firmware Android 4.4.4 KitKat on Galaxy E5 SM-E500M, then you can do
the following method:

If the Phone has stopped more than 15 minutes on the main
boot screen or you see a screen of death as it known follow the following:
1-     
Remove
the battery from your phone.
2-     
Power
on your phone in the Recovery mode by pressing the next three
buttons ( volume down button + home button + power
button )
.
3-     
Now
select Wipe Data/Factory Reset and Wipe Cache Partition. You can navigate
inside Recovery mode by using the sound buttons. After finishing you should
now click on reboot
4-     
Now
the problem should fixed.

Guide to help you in installing
Root on Galaxy E5 SM-E500M – E500MUBU1AOI1 Android
4.4.4 KitKat.

We
also work at provides a detailed explanation of how the root E500MUBU1AOI1 Android 4.4.4 KitKat on Phone Samsung Galaxy E5 SM-E500M detailed explanation you the from the following link:
Explain How to Get Root on Phone Galaxy E5 SM-E500M 4.4.4 KitKat
In the absence of a special link to download root above this means that we will put in the nearest time

Here is the topic has ended and has got the Official Firmware update for your device and also to root if availability.






More About Model OR


Leave a Reply

avatar
  Subscribe  
Notify of