How to update and install the firmware for Samsung phones by Odin , Kies and OTA

How to update to Official ROM/Firmware to Phone through Odin?

1.  After you’ve proven definitions for your Phone and the Phone into the
   Don to as the previous image now connect your Phone to your
   computer via a USB link, preferably those original link you find the
   computer in the check your Phone to know it as the following picture:
   
   Now connect your Galaxy to your computer via USB cable
2.  Now Go back to Odin to see that box ID:COM turned to blue, this indicates that your Galaxy  connected successfully and the following picture:

   

   Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.

3.  Click here to Start running and will show you the installation blue
   screen and then a black screen with white square let him and don’t touch
   anything Even computer until the
   pass from and show you the PASS Word to the color green in Odin program as the following picture:
   
4. The phone will
   automatically reboot now Phone Samsung Galaxy get update  successfully Congrats you the update.

 More easily

1. Download your Firmware for Samsung Galaxy from the above list
2. Download Odin 10.07
3. Switch off your Phone and boot into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin10.07 zip file and run the Odin3 v10.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Phone  to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: xxxxx_xxxxxx_INU.tar.md5
   Then
   unzip the ROM by holding the right button on the file and select
   Extract Here Rom will have a file with the extension tar.md5 and ROM
   for your Phone you will find a file named  xxxxxxxx_xxxxxx_INU.tar.md5 )
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your Phone should automatically reboot after completion
13. You can now disconnect your Phone from computer
14. Done